Automatic Pool cleaner not holding to the ground or floats

Created by haroldo level, Modified on Mon, 6 Jun, 2022 at 2:56 PM by haroldo level

PROBABLE CAUSE:

- 3/4" corrugated hose clogged or broken. SOLUTION: Clean hose with fresh water. Replace Hose

- System vacuum not enough

SOLUTION:

- Increase the suction power of your system. Increasing the valve that control the suction line (located near the pool Pump).

- Connect firmly the TJOINT to your Suction Cleaner & check all the pool hoses are tight.