New SkimmerMotion hose Connection for all deeps pools.

Created by haroldo level, Modified on Mon, 06 Jun 2022 at 01:57 PM by haroldo level

We had tested and now recommend the use of a shorter hose to connect your SkimmerMotion to your suction side cleaner.
This configuration uses the same 3/4" corrugated hose but using only 4 segments of hoses (11" 4 = 44").
If you have the standard 7 Segment hose (the one that comes with the SkimmerMotion), you can cut it to make it only 4 segments (approximately 44" long).
If you have one ballast, the ballast should be positioned one segment below the surface (see picture).
If your system is using 2 ballast, attach the ballast the second one 2 segments from the surface.
The Tee-Join should be placed one hose apart from the Suction side Cleaner (see pictures).
If your pool is deeper than 8 ft, then connect the Tee-Join 2 hose apart from the suction side cleaner




Was this article helpful?

That’s Great!

Thank you for your feedback

Sorry! We couldn't be helpful

Thank you for your feedback

Let us know how can we improve this article!

Select atleast one of the reasons

Feedback sent

We appreciate your effort and will try to fix the article